Customization: | Available |
---|---|
Type: | Li-ion Battery, Li-ion Battery |
Cathode Material: | LFP, LFP |
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
1. Super long cycle life
Over 4000 cycle @ 80%DOD @ 25°C can be circularly used.
2.Intelligent Integrated Battery Manage System(BMS)
Built-in BMS automatically protects internal cells from over-charge, over-discharge, over-temperature, short-circuit, etc. Ensure battery safety and reliability. Equalize and balance each cell. Prolong battery life. SOC-DOD-SOH reporting/setting device events, battery parameters, and storage, intelligent monitor, remote measure, remote communication, remote control.
3.Communication port
Dimensions | 320(L)*172(W)*230(H) mm |
Nominal voltage | 12.8V |
Nominal capacity | 100Ah |
Nominal energy | 1.28Kwh |
Service life | ≥4000 cycles, more than 80% at 0.5C charge and 0.5C discharge at 80% DOD 25°C. |
Self-discharge | <1%> |
Charging | 100A Max |
Discharging | 100A Max |
Charging voltage | 14.4±0.2V |
Charging mode | Step 1: 0.5C charge to 14.4V; |
Step 2: CV (constant voltage 14.4V) charge till charge current decline to 0.05C. | |
Peak discharge current | 100A |
DOD discharge rate | 100% |
Charging operating temperature | 0~45°C |
Discharge operating temperature | -20~55°C |
Storage temperature and humidity range | 1 month: -20~45°C; 3 months: -10~45°C; 6 months: 0~25°C; Humidity: 45%~90% RH |
The battery should cycle once in three months. Recommended storage temperature is | |
25±5°C of SOC 50%~60%. | |
Degree of protection | IP54 or above |
Installation | Battery compartments |
Constant current discharge | 100A |
Constant power discharge | 1000W |
Constant power discharge (Cell) | 320W |
Pack initial internal impedance | ≤100mΩ (50% SOC, Measure the AC impedance at 1kHz) |
Sunstone Power Co. established in 2003, Sunstone Power has 18 years experience of in manufacturing, marketing, brand name building of lead-acid batteries/battery plates.
Our factories (both plates factory & assembling factory) locate in Kunming City, Yunnan P.R. China. Since Yunnan P.R. is one of the main lead supply areas, we have good advantages of quality control, delivery control, and cost control. So far we are the only factory that gets pollution control permission from the government in Yunnan P.R.
Besides this, we set up our German company in Frankfurt since 2017 and Indonesia company in Jakarta since the end of 2018.
We have our own warehouse in both these two countries. It gives fast delivery and stock supporting to European and Southeast Asian markets.
Payment
1. Pay through T/T, western union, PayPal…
2. Price term: FOB Shenzhen port, CFR, CIF.
3. The customer is responsible for any tax or bank charges by their countries.
Packaging & Shipping
1. By sea, by air shipping, by car or train, other good shipping ways also welcomed.
2. We will send products in 30- 35 days after the bank receipt.
3. A tracking number and photos of products will send by email after arrange shipped.
Notice
1. Don't near the hot source and don't under the sunshine.
2. Don't charge in the sealed container.
3. No short circuit. It should be the additional charge if you don't use, and a single charge per three months, to avoid
irreversible sulfating. The battery should be changed when the battery jar is broken or the electrolyte omitted, to avoid acid
corrosion.
4. Don't store in the space of acid gas.
5. You should be careful and regular check when using the battery. To avoid the battery don't work. You should change the battery
if the capacity is not full or has been damaged, especially after one year using.
6. Don't put the battery in the fire, or it will explode.
7. Please use cotton cloth to clean, if the battery is broken down and leak electrolyte. Please wash your skin when touch the
electrolyte.
8. Don't clean the battery by using the organic solution. (e.g. petrol)