| Customization: | Available |
|---|---|
| Type: | Li-ion Battery, Li-ion Battery |
| Cathode Material: | LFP, LFP |
|
Still deciding? Get samples of US$ 313/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1. Super long cycle life
Over 4000 cycle @ 80%DOD @ 25°C can be circularly used.
2.Intelligent Integrated Battery Manage System(BMS)
3.Communication port
| Dimensions | 320(L)*172(W)*230(H) mm |
| Nominal voltage | 12.8V |
| Nominal capacity | 100Ah |
| Nominal energy | 1.28Kwh |
| Service life | ≥4000 cycles, more than 80% at 0.5C charge and 0.5C discharge at 80% DOD 25°C. |
| Self-discharge | <1%/M |
| Charging | 100A Max,50A rated |
| Discharging | 100A Max, 50A rated |
| Charging voltage | 14.4±0.2V |
| Charging mode | Step 1: 0.5C charge to 14.4V; |
| Step 2: CV (constant voltage 14.4V) charge till charge current decline to 0.05C. | |
| Peak discharge current | 100A |
| DOD discharge rate | 100% |
| Charging operating temperature | 0~45°C |
| Discharge operating temperature | -20~55°C |
| Storage temperature and humidity range | 1 month: -20~45°C; 3 months: -10~45°C; 6 months: 0~25°C; Humidity: 45%~90% RH |
| The battery should cycle once in three months. Recommended storage temperature is | |
| 25±5°C of SOC 50%~60%. | |
| Degree of protection | IP54 or above |
| Installation | Battery compartments |
| Constant current discharge | 100A |
| Constant power discharge | 1280W |
| Constant power discharge (Cell) | 320W |
| Pack initial internal impedance | ≤100mΩ (50% SOC, Measure the AC impedance at 1kHz) |
|
|
SLPO48-200 (48V 200AH Lithium battery ) |
SLPO12-300 (12v 300ah Lithium battery ) |
Sunstone Power Co. was established in 2003 in manufacturing, marketing, and brand name building of lead-acid batteries/battery plates.
Our factories (both plates factory & assembling factory) locate in Kunming City, Yunnan P.R. China. Since Yunnan P.R. is one of the main lead supply
areas, we have good advantages in quality control, delivery control, and cost control. So far we are the only factory that gets pollution control
permission from the government in Yunnan P.R.
Besides this, we set up our German company in Frankfurt in 2017 and an Indonesian company in Jakarta at the end of 2018.
We have our warehouse in both these two countries. It gives fast delivery and stock support to European and Southeast Asian markets.
Payment
1. Pay through T/T, western union, PayPal…
2. Price term: FOB Shenzhen port, CFR, CIF.
3. The customer is responsible for any tax or bank charges by their countries.
4.The price of the product is the sales guide price. Due to the recent fluctuations in the cost of raw materials, please consult customer service for specific prices.
5.The freight is subject to the actual charges of the logistics company. Please consult customer service to place an order.
Packaging & Shipping
1. By sea, by air shipping, by car or train, other good shipping ways also welcomed.
2. We will send products in 30- 35 days after the bank receipt.
3. A tracking number and photos of products will send by email after arrange shipped.
Notice:
Daily maintenance of battery pack
1. Check the voltage data on the BMS display and the actual battery voltage value to ensure the accuracy of the voltage collection of the BMS.
f they are inconsistent, proofreading is required. The error between the collected voltage and the actual battery voltage does not exceed 10mV.
2. Check the temperature collection data and actual temperature value of the BMS, and the data the error between the collected data and the actual temperature value is not allowed to exceed 3°C, to ensure that the battery will not be charged or discharged when the temperature is too high or too
low.
3. Check the BMS current collected data and actual current value, the error is not allowed to exceed 1%, to ensure that the battery will not be charged or discharged by overcurrent.
4. Check the reliability of the charging equipment to ensure that the charging equipment performs charging according to the voltage and current regulations by the BMS, to ensure that the battery will not be overcharged.
5. Check the connection of the battery pack is good, the contact points are in normal contact, and there is no accumulation of dust, powder, metal chips.
Caution
1. Children are not allowed to use the batteries.
2. It is forbidden to disassemble the battery.
3. Keep batteries or battery packs away from dangerous items or materials, such as corrosive chemicals, dangerous machinery and equipment, and high-temperature environments.
4. Unreasonable use of these products may cause smoke, such as external short circuits, overcharging, and high ambient temperature. If smoke occurs, please cut off the power in time, use a carbon dioxide or dry powder fire extinguisher for treatment, and bury it with sand or mud. The crowd must be evacuated in time during the entire process.
5. Unreasonable use of this series of products may cause the single battery to swell. In severe cases, it may cause the casing to rupture or crack. In these conditions, the battery should be stopped immediately. Please contact our technical department or after-sales service department for further solutions.
6. It is forbidden to short circuit the positive and negative terminal of the battery directly, and avoid any metal or other conductive objects contacting the positive and negative terminal of the battery. This operation may cause personal injury or property damage.
7. It is forbidden to immerse the battery in water or other conductive liquids. This operation may cause personal injury or property damage.
8. It is forbidden to use this product in series or parallel with other types of batteries. It is also forbidden to connect the whole system in series or parallel operation with other batteries. These operations may cause personal injury or property loss. If necessary, please contact the relevant technical department to obtain the correct technical support.
9. It is forbidden to get wet in an environment of more than 95%RH, even immerse in water.
Otherwise, it may cause internal short circuits, loss of function, or abnormal chemical reactions, and cause fire, smoke, explosion, and other accidents.
10. It is forbidden to put the battery system on fire or to be exposed to a high-temperature environment exceeding the temperature conditions specified in this specification for a long time. These environments above the safe temperature range will cause a significant decrease in the performance and life of this product, and even cause serious consequences such as combustion and explosion.
11. It is forbidden to store and use in an environment with high static electricity or high electromagnetic radiation. Otherwise, the electronic devices in this product will be damaged, which may cause potential safety hazards.
12. Connect the positive and negative terminal of the battery system strictly by the instructions, and reverse charging is prohibited.
13. When the electrolyte leaks, avoid contacting the electrolyte with skin and eyes. In case of contact, wash the area with plenty of water and seek medical assistance. It is forbidden for any person or animal to swallow any part of the battery system or the substance contained in the battery system.
14. Protect the battery system as much as possible to avoid mechanical vibration, collision, and pressure shock, otherwise, the battery system may short circuit, resulting in high temperature and fire.
){kind=link}